Thermal equipment / Houston, Texas
Engineering since 2009 · Projects in 26 countries
Thermal equipment for continuous duty.
Eight equipment families. Fifty product lines. One documentation standard. Novaryn engineers heat transfer for data centres, power, process industry, food, marine and the energy transition.
Families
08
Thermal equipment
Product lines
50
Application routes
Series
118
Configuration entries
Documents
167
Public and issued
Reference installation
Gulf Coast / United States
The Novaryn position
The equipment is half the job. The documentation is the other half.
Thermal equipment fails at the interfaces: an unclear duty point, a drawing that does not match the site, a maintenance route that was never planned, a certificate that arrives after commissioning. Novaryn builds the equipment and the record together so that selection, installation and service use the same assumptions.
01
Selection
Duty review, line recommendation and a preliminary envelope before quotation.
02
Engineering
Project-specific materials, connections, test regime and release documents.
03
Documentation
Datasheets, GA drawings and manuals structured for review and handover.
04
Service
Spares, inspection and retrofit support tied to the installed record.
Equipment families
Eight families. One engineering language.
Start with the thermal job, not the catalogue hierarchy. Each family page carries its lines, series ledger, standards and document set.
016 lines / 18 seriesCompact transfer / serviceable plates
Plate Heat Exchangers
Brazed, gasketed, welded, double-wall, wide-gap and semi-welded exchangers for liquid-to-liquid and refrigerant duty.
Explore family
026 lines / 19 seriesCold rooms / retail / process air cooling
Evaporators
Air coolers and evaporators for commercial refrigeration, blast freezing, cold rooms, preparation spaces and food processing.
Explore family039 lines / 22 seriesOutdoor rejection / recovery / hybrid cooling
Heat Rejection & Heat Recovery
Cooling towers, dry coolers, condensers, adiabatic and hybrid systems for site-scale heat rejection and recovery.
Explore family
046 lines / 7 seriesPower and auxiliary cooling routes
Engine & Generator Cooling
Box coolers, charge-air coolers, closed-circuit coolers, exhaust-gas exchangers and EGR coolers for engines and generators.
Explore family
056 lines / 16 seriesProcess transfer / safety separation
Process Heat Transfer
Bonded plate, diffusion-bonded, welded plate and shell-and-tube exchangers for difficult media, pressure and temperature duty.
Explore family
066 lines / 12 seriesOil, dielectric and grid asset cooling
Transformer Cooling Systems
Tank-mounted and free-standing oil-air coolers, oil-water coolers, dielectric modules and circulation pumps for transformers.
Explore family076 lines / 14 seriesCustom finned-tube coil engineering
Coils
Condenser, cooling, evaporator, heating and replacement coils for HVAC, refrigeration and process air systems.
Explore family
085 lines / 10 seriesAir, exhaust and waste-heat systems
Heating Solutions
Air preheaters, air-to-air exchangers, economisers, dryers and recuperative gas exchangers for process and waste-heat duty.
Explore familyNot sure which family fits? Send the duty point and we will return the route.
Talk to an engineerPlate pack / serviceable frame
Selection starts with media, approach and access.
How selection works
Four steps from duty point to release.
Frame the duty
Media, flow, temperatures, pressure, ambient conditions and the consequence of lost performance.
Match the family
A line recommendation with the configuration options that actually change the outcome.
Engineer the envelope
Materials, connections, footprint, weight, noise, corrosion class and service access.
Release the record
Datasheet, GA drawing, test plan and manual issued against the same revision.
Product library
Every line documented.
Datasheets, overviews, GA drawings and installation manuals are public. Certificates and material reports are issued against the order.
Public PDFs
167
Product lines
50
Series
118
Novaryn Thermal Equipment Catalog
Full catalog · 28 pages · Rev. 06
Plate Heat Exchangers Brochure
Family brochure · 6 pages · Rev. 04
Evaporators Brochure
Family brochure · 6 pages · Rev. 04
Heat Rejection & Heat Recovery Brochure
Family brochure · 6 pages · Rev. 04
Plate Heat Exchangers — Installation and Maintenance
Installation manual · 8 pages · Rev. 02
Current release
Novaryn Thermal Equipment Catalog
Complete thermal equipment range: plate exchangers, evaporators, heat rejection, engine cooling, process transfer, transformer cooling, coils and heating systems.
Thermal
equipment
catalog.
Eight families
Fifty lines
Rev. 06 / 2026
Industries
Built around the operating context.
The same exchanger behaves differently in a coastal substation, a hygienic production room and a data hall. Industry pages narrow the route.
01
Data Centre
Heat rejection, liquid cooling interfaces and modular capacity for digital infrastructure with predictable redundancy.
02
Power & Energy
Cooling and heat recovery for generation, substations, hydrogen projects, renewables and district energy.
03
HVAC-R
Plate exchangers, evaporators, condensers and coils for commercial refrigeration, heat pumps and building thermal systems.
04
Food & Beverage
Cleanable exchangers, air coolers and heating systems for production rooms, batch duty and chilled storage.
05
Heavy & Light Industry
Process transfer, air fin coolers and waste-heat recovery for metals, paper, manufacturing and mixed industrial utilities.
06
Transportation
Compact cooling and heat exchange for marine systems, traction equipment, rail transformers and mobile power.
07
Chemicals
Heat-transfer pathways for aggressive media, pressure duty, gas cleaning, carbon capture and specialist process conditions.
08
Oil & Gas
Robust heat-transfer equipment for safety separation, gas cooling, recovery and high-consequence operating envelopes.
Selected applications
The duty point is the story.
Data Centre / Heat rejection
Scalable cooling package for a high-density digital facility
Dry coolers, redundancy planning and plate-interface review for predictable thermal performance across a staged campus build.
Power & Energy / Grid / transformer cooling
Transformer cooling support for a renewable interconnect
Oil-air cooling route with lifecycle planning for a substation connecting wind generation to the transmission network.
Lifecycle
The unit does not end at dispatch.
Spares, inspection, cleaning, gasket replacement and retrofit support are tied to the installed record, not to a generic parts list.
01
Spares & consumables
Gaskets, plates, coils, fans, motors and instrument spares matched to the serial record.
Explore02
Inspection & cleaning
Condition assessment, performance review and cleaning plans for fouled or restricted equipment.
Explore03
Retrofit & capacity
Add capacity, change refrigerant, improve access or replace an obsolete unit within the existing envelope.
ExploreNext step
Bring us the duty. We will return the engineering route.
Send the process conditions, media, duty point, plot constraints and documentation requirement. A thermal engineer will respond with a selection path, preliminary envelope and the documents needed to review it.